High Altitude Low Pressure Simulation Test Chamber Environmental Climate Simulation Test Chamber

• After-sales Service: 1 Year
• Material: Stainless Steel
• Type: Environmental Test Chamber
• Structure: Vertical
• Warranty: 1 Year
• Protection Level: According to Specific Products
• Model NO.: HYLA
• Voltage: 380V
• Rated Load: 50Hz
• Application: Industrial
• Customized: Both
• Surface Treatment: Galvanized
• Pressure Range: Normal Pressure~Lkpa
• Temperature Range: -70ºC~+150ºC
• Cooling Down Rate: 1ºC/Min(Average)
• Pressure Recovery Rate: ≤10kpa/Min
• Transport Package: Wooden Package
• Specification: 504L/1000L/2000L, etc.
• Trademark: Huanyi
• Origin: China
• HS Code: 9031809090
• Production Capacity: 1000/Set Year

Product Description

Product Description

Huanyi can provide custom-built chambers for simultaneous testing of temperature and low-pressure altitude conditions. Two common applications are: · Testing of avionics or other aerospace equipment to simulate actual conditions it might experience.

· Simulation of high-altitude conditions like might be found in mountainous regions.
NOTE: Altitude test chambers are custom systems, and differing requirements may significantly change the cost and utility requirements. Please let Grande know as much detail as possible about your anticipated testing specification/method, and we can provide you with a tailored system for your requirements.

Alitude chamber is mainly used in the fields of aviation, aerospace, communication, electronics, electrical appliances, etc., to determine the environment of instruments, electrical products, materials, parts and equipment under low pressure, high temperature, low temperature single or simultaneous action. Adaptability and reliability tests can also be used to measure the electrical performance parameters of the test piece. Guarantee the highest quality and reliability that a product or material may encounter at different height levels.
 

Standard

1.IEC-540
2. ASTM D2436

3. JIS K7212
4.DIN 50011
5,BS2648
6.Mil-Std 202G (conditions 105C.A/B/C/F)
7.Mil-Std 810G condition 500.5)
8.IEC 60068-2-39
9.IEC 60068-2-40
10.RTCA/DO160F
11.JIS W 0812
12.GB10590-89 Low-temperature and low atmospheric pressure testing condition
13.GB10591-89 High-temperature and low atmospheric pressure testing condition
14.GJB150.2-86 High-temperature and low atmospheric pressure(Altitude test)
15.IEC60068-2-1.1990 Testing methods of Low-temperature test chambers
16.IEC60068-2-2.1974 Testing methods of High-temperature test chambers Structure: 1. Chamber adopt high quality cold rolled steel plate, surface with powder painted, with strong anti-rust ability. 2. Working room with high quality stainless steel plate, rounded shape, smooth, and easy for cleaning. 3. Between working room and chamber, filled with superfine glass fiber insulation material . 4. Chamber door with double toughened glass structure, available for clear observation of the inside chamber. 5. Installed rubber sealing ring between working room and glass door, ensure high vacuum rate inside the chamber. 6. Integrated type : low pressure chamber on upper side, and vacuum pump on bottom side.

Product Parameters

 

Model	HYLA-504A	HYLA-1000A	HYLA-504B	HYLA-1000B	HYLA-2000B
Internal(DxWxH)cm	80x70x90	100x100x100	80x70x90	100x100x100	120x120x150
Power consumption(KW)	11	15	16	18	27
Temp.range	-40ºC~150ºC		-70°C ~150ºC
Temp. fluctuation	±0. 5°C
Temp. deviation	≥100ºC ,±3.0ºC(Normal pressure no-load),<100ºC ,±2.0ºC(Normal pressure no-load)
Temp. rise and fall rate	0. 7ºC~1. 0ºC/Minutes(Whole course average)
Pressure range	Normal pressure~lKpa
Working environment temperature	+ 5°C ~+35ºC
Power Supply	AC 380V±10% 50Hz 3 phases and 5 lines (3 fire lines, 1 zero lines, 1 protection lines.)

Detailed Photos

Company Information