Laboratory Programmable Precision Hot Air Oven Precision Drying Oven

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: 220V
• Model NO.: HYVO
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Temperature Range: Rt+10°ºC~300ºC
• Temperature Fluctuation: ≤0.5ºC
• Temperature Uniformity: ≤2.0ºC Within 200ºC
• Temperature Deviation: ≤±2.0ºC
• Transport Package: Strong Wooden Case
• Specification: 2250L
• Trademark: HUANYI
• Origin: China
• HS Code: 9013809000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

Precision Hot Air Ovens are used for product's drying,curing and high temperature aging test.Mainly be applied in chemical,electronic communication,plastics,cable,electroplating, hardware,automotive,photoelectron,rubber products,
molds,painting,printing,medical,aerospace and higher education industries.

 

Machine structure

Equipment structure
1. Controller direction	Located above the machine, the single door opens from right to left;
2. Internal material	Mirror stainless steel plate, thickness 1.0mm;
3. External material	SECC steel plate thickness ≥1.2mm powder paint treatment (off-white);
4. Insulation material	100K high-density glass rock wool is 80mm thick and has good thermal insulation, ensuring maximum temperature insulation;
5. Partition	2 pieces of grid plate (stainless steel mesh type)
6. The urgency of security	The material is high temperature resistant silicone strip;
7. Windows	Double-layer tempered glass window, size: 280×280mm;
8.Foot pads	Equipped with fixed foot pads.

Temperature Control System
1. The temperature control is a PID microcomputer, which can automatically calculate, PV/SV can be displayed simultaneously, and can be set by button setting to any temperature value between normal temperature and the highest temperature (Taisong);
2. Timer setting, 99.9 seconds - 999 hours (optional setting of hours, minutes, seconds, Taiwan Yang Ming)
a. Continuous use, b. When the temperature reaches the timer, the heating current is cut off when the time is up (end alarm device)
3. When the temperature is up, the heating current will be cut off (alarm device)
4. Temperature sensing input CA (K) TYPE temperature sensing head (Taiwan Shenjie);
5. Output is 3-32V;
6. The current controller controls the power output by a solid-state relay and the temperature-controlled PID microcomputer contact output. The signal automatically adjusts the output ratio and can accurately control the overshoot accuracy of the temperature (Taiwan Yangming);
7. The heating material is stainless steel heater (Swedish high temperature wire)

Air supply system
1. Forced horizontal air supply circulation, the air source is driven by the circulation motor to drive the wind wheel through the electric heater, and the hot air is sent from the right air duct to the inside of the oven, and the used hot air is sucked into the left air duct to become the air source for recirculation heating, thus reducing the Energy loss is ensured and the temperature uniformity in the box is ensured. When the temperature drops due to the opening of the door, the air supply circulation system can also be used to quickly restore the working temperature value.
2. The motor is a long-axis high-temperature resistant type with a power of 2/1hp/50Hz (Taiwan Tonghe).
The 3.7-inch wind wheel is a multi-blade turbine type.
4. Equipped with adjustable air deflectors.
5. There is an air inlet on the left and an exhaust outlet on the right, with a diameter of 80mm and an adjustable exhaust volume.

Product Parameters

Technical Parameters
Internal dimensions	600(W)×900(H)×500(D)mm
External dimensions	820(W)×1590(H)×680(D)mm The actual product shall prevail.
Temperature range	RT+20~200ºC
Control precision	±1ºC;
Temperature uniformity	±2.0ºC(no load)
Heating rate	RT~100ºC for about 10 minutes;
Power supply	220V single phase, power 3KW, current 18A

 

Company Information