Drum Drop Testing Machine for Small Electronic Consumer Products

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: HY-2310
• Max Diameter of Workpiece: Customized
• Mass Scope of Workpiece: Customized
• Type: Drop Testing Machine
• Maxcapacity: Other
• Accuracy Grade: Other
• Load Way: Mechanical Load
• Loading Method: Other
• Display: Digital
• Control: Computer Control
• Weight: Other
• Power Source: AC220V
• Oil Cylinder Position: Other
• Number of Rollers: Binoculars
• Allowable Test Piece Weight: 5kg
• Drop Height: One Each for 500 and 1000mm
• Roller Width: 350mm
• Test Speed: 5-20 Rpm, Adjustable by PLC Programming Control
• Test Count Range: 1-999999 Times, PLC Programming Control Is Adjusta
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9031200090
• Production Capacity: 10000pieces/Year

Product Description

Product Description

This machine is suitable for tumbling and dropping experiments on mobile phones and other similar products. It has a 6-digit display counting function and has 2 test chambers that can conduct experiments on 2 samples at the same time.
The mobile phone roller drop test machine is suitable for continuous rotation drop testing of various small portable electronic products such as mobile phones, PDAs, electronic dictionaries, CDs, MP3s, and remote controls. After N drops, the number of times set by the counter reaches , to evaluate the product's ability to withstand rotational drops.
 

Meet the standards

The test equipment meets the international GB/T2423.8-1995 or IEC60068-2-32, Ed2 test conditions; the roller manufacturing process meets the GB/T2423.8-1995 appendix standard
 

Features

1. The unique design of this machine can meet the simultaneous test of 500 or 1000mm drop height, and can test up to 2 products at the same time;

2. This machine uses Taiwan-made speed-adjustable motor drive and speed regulator to set the rotation speed, and is driven by a synchronous pulley/drive. It has extremely low starting and stopping noise and smooth operation;

3. The operation panel has a simple design and is easy to control. The frequency can be directly displayed and the rotation can be controlled by inching to facilitate loading and unloading of specimens. An alarm will be issued when the set number of times is reached;

4. It adopts LCD display and can preset the counter count, has an electric memory function, and automatically stops when the set number of times is reached
 

Product Parameters

Technical parameters
1. Number of rollers	binoculars
2. Allowable weight of test piece	5kg
3. Drop height	One each for 500 and 1000mm
4.Roller width	350mm
5. Test speed	5-20 rpm, adjustable by PLC programming control
6. Test counting range	1-999999 times, PLC programming control is adjustable
7. Material requirements for drop collision surfaces	Barrel material: transparent 10±1mm thick acrylic plate
8. Steel plate requirements for drop impact surfaces	Steel plate thickness 3±0.1mm (304 stainless steel)
9. Wood board material requirements	The thickness is 17±1mm, and the material is pine. It is a material with medium density, uniform structure and strong stability.
10. The slope is bonded with a polytetrafluoroethylene slider, white, 2mm thick, which can be bonded with 3M double-sided tape or 707 glue.
11. Operation method	PLC programming touch screen control
12.Display mode	Color touch screen display
13. The number of drop laps can be set
14. The equipment can be started and stopped at any time
15. Countable reset
16.Install emergency stop button
17. Install alarm lights and buzzers
18. A protective cover must be installed around the equipment to prevent accidents caused by splashing glass slag and have sound insulation function.
19. The motion axis is equipped with a limit switch
20. Use drag chains for wires to ensure the safety of the equipment. Cables and pipes in the drag chain are evenly laid out and no overlap is allowed.
21. Equipment electricity consumption	220V-50Hz
22.Maximum current	≤10A

Company Profile

FAQ

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.