Low Power Consumption Thermal Shock Test Chamber Under Alternating High-Low Temperature Testing Environment

• After-sales Service: 1 Year
• Power Supply: AC 380V 50Hz
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• High Temperature Zone Temperature Range: RtºC~+200ºC
• After-Sales Service:T1 Year Power Suppl: Rt~+200ºC: About 30min
• Model NO.: HYTS-408C
• Temperature Shock Range: -65ºC~+150ºC
• Low Temperature Zone Temperature Range: Rt~-55ºC
• Temperature Fluctuation: ≤±0.5
• Cooling Time in Low Temperature Zone: Rt~-55ºC: About 55min
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8514199000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

This machine is suitable for aerospace product,electronic prod-ucts,vehicle metals,various electronic components, wires and cables,etc., machine is mean to test the performance indicators and quality management under high and low rapid alternating environment.
 

Features

1. Perfect appearance and easy to operate.
2. Programmable program: maximum 1,000 groups, time setting: 32,000 hours and 59 minutes per section, repeatable command execution: each command can be cycled up to 32,000 times
3. Two chamber structures, high temperature chamber and low temperature chamber, control automatically, stay and switch time adjustable.
4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water
5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.
6. Cold and hot shock temperature recover within1 minute, which complies with MTL, IEC, JIS, GJB and other international standards.
 

Machine structure

The precooling zone, preheating zone, and test zone are independent. The three boxes can be switched through the air door without moving the test product. When the room temperature is affected, the ambient temperature is introduced into the test space through the blower to eliminate the heat or cold in the test space. At the same time, The damper of the high and low temperature tanks is closed; when the low temperature is hit, the dampers of the high temperature and normal temperature tanks are closed, and the low temperature tank is connected to the test chamber, and the pre-stored cold energy is instantly introduced into the test chamber; when the high temperature is hit, the dampers of the low temperature and normal temperature tanks are closed, and the high temperature tank is connected to the test chamber. , instantly introducing the pre-stored heat into the test chamber. This achieves the purpose of rapid temperature changes.
 

Product Parameters

Main Specifications
Cabinet
Studio size	Approximately W 800 × H 850 × D 600 (mm)(W width × H height × D depth)
Dimensions	Approximately 1750×2200×1850(mm), subject to the actual product
Volume	408L;
Noise	Within 75dB (measured 1 meter from the front of the machine and 1.2 meters from the ground)
Temperature
High temperature zone	Temperature range	RTºC~+200ºC
	Heating time	RT~+200ºC: about 30min
Low temperature zone	Temperature range	RT~-55ºC
	Cooling time	RT~-55ºC: about 55min
Studio	Temperature shock range	-65ºC~+150ºC
	Temperature fluctuation	≤±0.5
	Temperature deviation	≤±2ºC
	Temperature uniformity	≤2ºC
	Temperature conversion time	≤10s(Damper opening time)
	Temperature recovery time	≤4min
Operation mode	There are two high and low temperature impact modes and high and low temperature + room temperature impact modes, which can be set by the human-machine interface.
High and low temperature shock mode	150ºC(30min)-NC--40ºC(30min)
High and low temperature + room temperature impact mode	150ºC(30min)-room temperature--40ºC(30min)
Power	High greenhouse power: 9KW Low temperature greenhouse power: 9KW Other power about: 2KW Maximum power about: 20KW Operating power approximately: 12KW
Voltage	Power requirements: 380V 50HZ three-phase five-wire system plus ground wire Power: 20KW current 40A
Condensation method	Water cooling
Gross weight	550KG

Company Profile