Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
Application Area
Machine is suitable for aerospace, automotive, home appliances and scien-tific research. To determine the electrician, electronics, automotive electronics, materials and other products, in the high and low temperature test thetemperature of the environment impact parameter and the performanceafter the change.
1. Perfect appearance and easy to operate.
2. LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.
3. Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.
4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…
5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.
6. Cold and hot shock temperature recover within 5 minutes, which complies with MTL, IEC, JIS, GJB and other international standards.
7. With RS-232C communication port for connecting PC to control, record and save test report.
| Model |
HYTS-50 |
HYTS-80 |
HYTS-108 |
HYTS-216 |
HYTS-252 |
| Test zone size (W×H×D) |
36×35×40 |
50×40×40 |
60×40×45 |
60×60×60 |
70×60×60 |
| External chamber size (W×H×D) |
120×182×150 |
143×195×160 |
151×185×185 |
151×205×200 |
151×215×200 |
| Hot zone temp. range |
+80ºC~+200ºC |
| Cold zone temp range |
-10ºC~-40ºC,-10ºC~-60ºC,-10ºC~-70ºC |
| Test zone temp. range |
-40ºC~+150ºC,-55ºC~+150ºC,-60ºC~+150ºC |
| Temp. fluctuation |
±2ºC |
| Temp. recovery time |
<5min |
| Exterior material |
Painted steel |
| Internal tank |
Stainless steel plant #304 |
| Insulation |
PU+Fiberglass wool |
| Heating system |
Stainless steel high temp. heater |
| Cooling system |
Compressor + Finned evaporator + Air(Water) cooled condenser |
| Controller |
Touch LCD ++ SSR + PID |
| Accessories |
Power test hole (50mm) |
| Control status indicator |
| Load shelf (2 freely adjustable) |
| Protection |
Overheat protection circuit breaker |
| Compressor overload protection |
| Control system overload protection |
| Overload indicator |
| Phase sequence protection |
| High voltage and low voltage protection |
| Over temperature protection |
| Fan overcurrent protection |
| Power supply |
AC 3Ψ380V 60/50Hz |
| Customization |
Special requirements, custom service |
Audited Supplier 
){kind=link}
){kind=link}